WATERING SYSTEM




Poultry Nipple drinking system for day old chicks, pullets, broilers, rooster breeders, cage and floor layers, etc.

Quality Systems nipple-watering system are made of top quality stainless steel and plastic components which guarantees a long service life.

It is designed to provide the optimum water requirements with each drinker sufficient for 15 broilers/layer birds and 8-10 breeders. Built with strong design aspects the fully 180* nozzle with triple seat made of stainless steel ensures trouble and drip free performance, which are ideal for all the poultry drinking needs.

The combination of Nipple and Drip Cup ensures dry manure and an optimum flow for every age! The height of the drinking lines has to be adjusted to the size of the birds! They should have to stretch slightly to reach the nipples

Uniform pressure in the lines is maintained using a pressure regulator ensuring equal amount of water in each nozzle.

Capacity: 15 broilers/layer birds and 8-10 breeders

Advantages:

•  a simple, reliable and leakproof water supply

•  constantly fresh and clean drinking water

•  Hygienic floor conditions

•  Trouble-free poultry rearing.

•  Reduced swarming of flies and other insects

•  Dry litter

•  improved results

Functions:

1. Water Supply:

The main water supply should be a good quality drinking water, it is absolutely necessary to filter the water before it enters the drinking system. Water is supplied via a pressure regulator with integrated flush facility maintaining a uniform pressure in the lines ensuring equal amount of water in each nozzle. The pressure regulator can be installed in the middle of a water line according to the length of house

2. Drinking Elements:

The drinking lines are supplied in assembled elements of 10ft length. These elements are then coupled together through the length of the house.

3. Breather Unit:

A breather unit is installed at the end of the drinking line for the ventilation and the flush.

4. Suspension:

The suspension of the drinking lines is supplied via hangers, which are stuck on the aluminum profiles approx. every 10ft. These hangers are connected with the suspension lines via ceiling pulleys with the central hoisting cable. Then the drinking line can be adjusted to the required height with the help of the middle winches, which can be winched up easily to the ceiling for emptying and cleaning.